ADOR WELDING : CHAMP T400

CHAMP T400 is an inverter-based welding power source intended for use in Shielded Metal Arc Welding (SMAW). It can also be used for Gas-shielded Tungsten

Arc Welding (GTAW) along with an external H.F.TIG control unit. It is mainly suitable for long-distance welding & cellulosic electrodes. 

It has constant current characteristics. The set output current is constant against input supply variations of +15 % and -10 %. Champ T400 is also available with

An inbuilt ELCB/ RCCB, which protects from earth leakages.

Champ T400 operates over the range of 10A- 400A with a duty cycle of 60% and efficiency above 85%.

It is available with adjustable welding current control & adjustable Arc Force control with MMA/ TIG mode selection. The arc force function is available in MMA

mode only to adjust up to 80A more current than the set current.

Smooth and stable arc welding is possible with a cellulose electrode (6010) with minimum spatter in CELLULOSIC mode. A remote control socket is also provided

to connect the remote control unit to set the welding current remotely (optional). The panel/Remote selection switch is used to select the source of the set welding

current.

A 4-digit Digital Front Panel Meter is provided, which shows the set and actual value of current.

Champ T400 is also available with inbuilt VRD & DUAL display with arc ON timer (optional)

• In case of a machine with a VRD option, if the machine is kept ON in ideal condition in MMA mode, OCV will become 11-12V after 3 minutes approx. till the next

  arc strike.

• In case of a machine with an option of dual display with arc ON time, an additional 3-digit digital panel meter is used to display the actual voltage. Also, the arc on

  Time can be displayed & reset with the help of the time & reset key.

Power source is protected against single phasing, under voltage, over voltage, short circuit, and temperature rise. Anti-stick protection is provided at the time of welding.

CHAMP T400 is suitable for all kinds of electrodes used for fabrication work, Pipe Welding, and Site Construction. It is also capable of welding with 100-meter welding &

100-meter return cable. For the MMA welding mode, up to 6. 3mm electrodes can be used with continuous welding.

For More Details: Ador Welding Limited

Tel: (020) 40706000

www.adorwelding.com